How to Refinish a Teak Shower Bench?
Teak shower benches are handy to have in your shower if you need assistance showering or need the bench as extra storage space. Other shower benches are made from bamboo and other types of wood; however, teak is a favorite because of its moisture-resistant qualities that enable it to last longer than other woods.
If you recently purchased a teak shower bench, you probably want to know how best to maintain and clean it so that it can serve you for years. In addition to cleaning practices like rinsing it after every shower and regular deep cleaning, your bench needs teak oil to help maintain its luster and finish. Also, with age, teak changes color to a silver shade.
Steps to Refinishing Teak Wood
To refinish your teak shower bench, there are several steps you need to take that will help prolong its lifespan.
Clean your shower bench
To clean your teak bench, you should use a teak cleaner, and if you don’t have one, you can make your own from scratch. All you need is half a cup of water and half a cup of vinegar, and add two tablespoons of dishwashing liquid.
Apply the cleaner to the bench and use a soft-bristled brush to scrub away any dirt, scum, and stains. The best place you should clean your teak bench is outdoors in your backyard. Use a hose to spray off the soap and dirt. If you are unsatisfied with the cleaning, you can repeat the same steps as above until the bench is thoroughly clean.
Allow the bench to dry completely.
Sand the bench
You must sand away the surface of the wood. This will help remove any silver color that may be present. Avoid too coarse sanding paper and instead, use one that has 120-grit. You also need to ensure that you sand in the direction of the wood grain. If you need to smooth down rougher grain, you can switch to 220-grit sandpaper and continue to sand the whole bench.
Use a tack cloth to remove the dust and other particles. When carrying out the sanding step, you must wear gloves, goggles, and a mask as teak dust can affect you.
Apply Teak Oil
Once the wood is clean, dry, and dusted, you can now apply teak oil. You can also use a teak sealer if you do not have the oil. Both of these products work by covering the wood’s surface to help protect it from the elements. You only need to apply a thin coat of oil using a soft-bristled brush.
Allow the oil to soak in for a minute or two, then use a soft pad to buff the surface lightly. Once the first coat of oil dries, you can add another or two coats for added measure.
With the tips outlined above, you can easily refinish your teak shower bench and have it looking as good as new. With the proper maintenance, your bench will serve you for years to come.