How to Make Roman Shades Without Dowels?
Roman shade without dowels eliminates the need for having any rod pockets or rods. It can be perfect for a compact area and creates an elegant look. The cord lift helps to maintain the soft fold. When you make a roman shade without dowels at home, there can be custom-made creations. You can easily make modern and traditional designs with the fabric of your choice. Here is the list of steps to make roman shades without dowels.
Items and Measurement
You will have to collect all the important items so that you can start making roman shades without dowels. Once you are done with collecting the items, you need to measure the width of the sill of the frame of the window. If you want to mount it from the inside, then you will have to measure the inside frame. Similarly, for an outside mount, you need to measure it from the outer edge.
Measure the length accordingly so that you will be able to mount it conveniently. However, you will have to keep in mind that you add 2 inches to the width and 6 inches to the length. For outdoor mounting, you need to add 4 inches to the width.
Cutting the Fabric
We now move onto the next step which is cutting the fabric. There has to be precise measurement when you cut the shade fabric and the lining material. Always see if it can interface with the length and width measurement. Once you are done with it, you can center the other side to the wrong side of the shade fabric. By giving a gentle press with the warm iron so that there be a perfect interface. Ensure that you do the interface of the upward side.
The Pinning Process
You can now pin the edges to the non-decorative or wrong side of the fabric. Always do it with the center of the pattern of the fabric. When you are done with the interfacing process, you can remove the pins. In some cases, you will find clear instructions. However, it may vary from one manufacturer to another. The next important step is to pin the ring tape vertically. You must do it on the right side of the lining material as well as on the ringside.
First, you will have to pin the two strips on the outside edges and the third strip at the center. By centering additional strips between the edges, there will be a flawless appearance. Again center the additional ring tape strips with an appropriate spacing of 5 to 7 inches. Follow it by aligning the rings horizontally. Make sure that there will be a spacing of 1/4-inch from the shade’s bottom.
Time For Sewing
In this step, you will have to machine stitch the sides of the ring strip. Attach it to the lining material and do it on both sides. Make sure that the ringside faces upward. If you are done with it, you can remove the pins. Again you will have to pin the shade fabric with that of the lining material. Do keep in mind that the ring sides are together. Follow by securing the sides and the bottom together by leaving an inseam of 1 inch. Again remove the pins and turn the fabric.
With a warm iron, you can press the edges. Here you will have to make the lining material face upward. You can now take the rings and use a hand sewing needle as well as thread. Begin with the line inside and keep processing until you make small stitches.
Using other Tools
Now it is time to use other small tools. First, you will have to make a cutting of the board of 1/2 inch. Make sure that it is short or 1/4 inch than the width measurement if it is for an inside mount. For an outside mount, you will have to cut it 2 inches wide. You can now cover the mounting board with the shade material. However, this is only for an outside mount.
For the inside mount, you will have to cover it with lining material. Take a stapler and start stapling the position from the top of the board. Staple it to the mounting board and position it accordingly so that it can hang. During this period, you will have to cut off any excess fabric. Now you need to turn on the unsewn edge if it is for an outside mount.
Securing the Bottom Ring
Before we start securing the bottom ring, you will have to align the eye screws. This can be done with the help of ring tape strips. Screw them into the bottom and double the length. You can do it on the mounting board by adding the width. Cut the drapery cord according to the length of the ring tape strip. You can now leave the shade lying on the flat surface by keeping its side up. The next step will be to knot the cord securely to the bottom ring. This has to be done by threading the cords on the ring tape strip’s left side.
Do it by threading it up on the rings strip and then along the eye screw. Follow it with treading the cord on the west of eye screws. Make sure that you work from left to right. You will have to repeat it with all the cords as well as ring tape strips. Now you can knot the cord just to have the rightmost eye screw. Again knot the cord near the shade’s bottom. To make sure there will be a uniform length, you can trim the cords.
If you are looking to hang it on the outside, you will need L-brackets. For inside mounting, you can do it on the window frame. Always attach a cleat to the frame or wall so that there will be a perfect-looking roman shade. The cleat helps to keep the roman shade in position. You can use the cord to make appropriate adjustments.
- How to Make Roman Shades with Rings?
- How to Make Roman Shades Using Mini Blinds?
- How to Make Cordless Roman Shades?
- How to Make Faux Roman Shades?
- How to Make Roman Shades?
- How to Install Roman Shades?
- What is The Best Fabric for Roman Shades?
- How to Make a Faux Roman Shade Valence?
- How to Select Blind Roman Shades?