How to Clone a Remote Gate Opener?
You can clone a remote gate opener by following the steps below;
Once you have identified the clone code from your remote open and close transmitter, you can clone your remote to any other gate opener in two easy steps.
This means that if you lose your remote’s batteries or it stops working, don’t worry! You can still clone your opener without going through the hassle of replacing your gate’s system.
If you need to clone a remote, the process is quite simple. Just make sure you meet all the requirements for cloning your remote gate opener before attempting to clone it to another gate opener!
Clone your gate opener using the following simple steps:
Step 1: Identify clone code of remote from gate opener transmitter.
If you just want to clone the remote, you can skip this step and go straight to step two below.
Step 2: Program clone code into gate opener remote.
Step 3: Test clone gate opener remote to be sure it is functional.
If you have not purchased the clone code yet, don’t worry; you can use the clone code for a clone gate remote below:
T9003A0800B000C20A F800F600D016481 C07699
000A00B0C1 S9300390008000000
Gate remote clone code T9003A0800B000C20A will clone K40, CA-50Ri, WD5003RT, G9845T, F8002T, and many other gate remote controls.
Before programming the clone gate remote into your original control, you want to clone the remote code into your clone remote.
If a clone gate remote can be programmed, you will need to take it close to the reader and put the clone gate opener in learning mode. You must see a solid light on the clone remote before it is recognized by the receiver. Press the clone button 3 times quickly and wait until you see a solid light. Once you see the solid light, your cloning is successful.
If all the steps are followed correctly, then the clone opener will work like your original one.
The following are remote cloning mistakes you should avoid when cloning a remote gate opener:
- It should use the same frequency as your original remote. If you want to clone a remote gate opener of a different frequency, then it is not the right clone gate opener that you are looking for.
- You cannot clone any remote from RF433 to RF315Mhz or clone 315Mhz remote into 433 one. This is because the clone remote gate opener can only clone within its own frequency.
- We should clone more than one button if a button is broken or misplaced. You cannot clone a complete remote control if you only have one remote available.
- Also, remember that clone remote gate opens are not always compatible with your original remote. Lastly, when it comes to remote gate opener cloning, your clone remote should stay with you and not be placed anywhere else.
Activating the clone gate opener can sometimes be difficult because clone remotes are not always compatible for use in the U.S or other countries. Still, it is also an art that, once mastered, allows you to enjoy the benefits of owning multiple remote controls without having to go through the hassle of replacing them.