How to Mount a Manual Tire Changer
A manual tire changer is a handy tool that serves great for every mechanic. You can easily mount or demount tires in no time. Not just every mechanic, every vehicle owner must own a manual tire changer. A manual tire changer is easy to use. However, you should know the exact steps and process to perform the tire-changing activity successfully. Here are the complete steps of how to mount tire with a manual tire changer.
Am manual tire changer is easy to use and has high-quality construction. It allows you to use it for a long time and comes with minimal maintenance. You can even find the one that can come with extra features and include a number of accessories. One of the best things about the tool is that you don’t have to use other accessories while mounting or demounting tires.
One of the most important things that you will have to keep in mind is that tires come in different sizes. The manual tire changer must perfectly go with the size of the tire. However, the good news is that you can find the one that allows you to use it with tires of different sizes. Make sure that it serves perfectly for breaking beads, and it must eliminate the need for having any special skills. Some can even come in a portable design that makes it great for on-site application.
Using a Manual Tire Changer
Mounting or demounting tires will be an easy task when you use a manual tire changer. Even though it is easy to use, you will have to make sure that you know the complete process. Below we discuss the procedure to mount a manual tire changer.
Fixing the Rim and Mounting the Lower Bead
We begin the process by fixing the rim in the tire changer. Always position the sensor to the mounting head’s opposite side. If you position it in other locations, then the tire may hit it, which can cause inconvenience. We can now process to mount the lower bead. Be careful with the slide while performing the task. The sensor positioning helps to prevent the sliding of the tire.
Positioning the Sensor
You must always position the sensor on the opposite side of the mounting head. If you position it on any other side, then there will be chances of hitting. You can follow by mounting the upper head. Again, do keep in mind that it does not slide. It will be better if you give markings that help to indicate the position of the sensor.
The Final Step
You are almost ready to mount the tire manually. Always give a check if there is a snug fit. It must not have any movement, and you can confirm it again by checking the beads. Likewise, you can follow that same for demounting the tires. The only difference is that you need to break the beads and reverse the process to do the same.