How to Paint Cars DVD Players?
If you’ve been looking for a way to enhance the look of your car, then this is the blog post for you. Painting your car with a DVD can give it that shiny new look without having to go through all of the hassle and expense that comes with painting it from scratch. In this article, you’ll get to learn everything you need to know about getting started in paint-your-car DVDs.
When it comes to painting your car’s DVD, there are certain factors you need to take into account before diving in. For instance, if your car’s DVD is made of plastic, it will be much easier for you than vinyl or leather. Vinyl and leather require a different approach as they can crack more easily!
Before even attempting to paint over the original color on the car DVD, you need to determine whether or not the original color is still available. If it isn’t, you need to locate a close match by using paint chips or visiting your local hardware store.
Here’s How to Paint Your Car DVD Players
You want to start this process by cleaning off any dirt and dust on the car DVD. Next, use painter’s tape (if necessary) to cover up all openings like the USB port and the CD tray. That way, you can prevent paint from damaging the internal parts of the DVD player.
Before applying the first coat of paint, you need to sand down any scratches or blemishes that may exist on the car DVD. This gives a good surface for the primer and prevents imperfections from showing through later. Ensure not to touch up areas with no scratches because that would create a bumpy, uneven surface for the paint to adhere properly.
If you are applying a color other than black or silver, make sure to use an automotive-grade primer. This type of primer is specially formulated to prevent chipping and peeling later by keeping all layers solid and tightly bonded together.
After letting the first coat dry overnight, you can go ahead to apply the second coat. It is important that you do not rush this step, as the finish must be applied evenly.
If you are applying a base coat, then only apply one layer of clear before allowing time for drying between layers. The color will run together if too many different types of paint are used on top of each other. Allow the first two coats to thoroughly dry for a couple of days before applying the third layer of paint.
After letting another day pass, you can go ahead to apply a topcoat. Make sure not to rush this step, as the finish must be applied evenly over all areas of color, and clear coats are dried in between layers.
Conclusions
The more layers your car DVD has, the better protected it will be. After the paint has dried completely, you are now free to enjoy using your newly colored car DVD. You can even get creative and paint it in multiple colors. Click here to learn more about car DVD players!