What is the Best Way to Cut Cement Board
Wondering how to cut the cement board and what is the best way to do it? When you use a cement board, you can use it for different projects. If you know the right technique, you can cut it conveniently. Here are the different ways of cutting a cement board.
1. Snapping Thin Cement Board
Laying the Board
For thin cement boards, you can lay the cement board and start it snapping. If the cement board is thick, then you will have to use a saw.
Drawing a Line
To make sure there will be appropriate cuttings, you will have to use a pencil and draw a line. Ensure that the line is visible and clear.
Cutting the Board
The next step will be to use a utility knife for cutting the marked line. Always make sure that you are on an even surface and it must not wobble. After this, you will be able to snap the board conveniently. The final step will be to split the board. You will have to do it by placing it on your knees.
2. Using a Circular Saw
Using Carbide-Tipped Blade
A carbide-tipped blade serves as the right material as cement is a hard material. You will have to choose the blade that comes with a minimum number of teeth. This helps to reduce the amount of concrete dust.
Drawing a Straight Line
You will now have to take a ruler and pencil and draw a straight line. This makes sure there would be accurate cutting. Ensure that the line is clear so that there will be easy visibility.
Setting the Board
Before you set the board, you need to set the depth. You can do it by adjusting the base of the saw and secure it. Now you can set the board on the front side down. However, keep in mind that it must have a stable structure.
Operating the Saw
Always bring the saw to full speed before you start cutting the board. Follow it by sawing smoothly and slowly. Ensure that you have perfect control and it must not jam in the cement.
3. Cutting Irregular Shapes
Using a Jigsaw
For cutting irregular shapes, a jigsaw serves the right purpose. It can cut different shapes and makes sure there will be clean performance. You can always start it by fitting the jigsaw with a carbide grit blade or metal cutting blade.
Placing the Board
The next step will be to place the board with its top face up. This helps to prevent cracking or slipping on an irregular surface.
Before you begin to drill holes, you need to make markings with the help of your pencil. This helps to prevent any guesswork and provides an even line. Now you can drill a hole by using a masonry bit.
Inserting the Saw Blade
The final step will be to insert the saw blade into the hole. Make sure that it is at full speed as jigsaws operate very slow. You can now push the jigsaw slowly for cutting the board.
We have seen the three different ways of cutting a cement board. All of them can be applied in various scenarios. However, snapping thin cement boards can be easy and offers safe operation.